How is the Neodymium magnet produced?
Time:03/29/2019
The production of Neodymium magnets is mainly produced by slicing machine slicing. Neodymium strong magnet blank material is bought back, and then processed according to the size of each customer's demand. However, the production and processing equipment of Neodymium magnet is relatively simple and single, and the slice of Neodymium magnet is produced and processed. When the machine is working, it can only be cut slowly with one knife and one knife. When one size is cut, it has to be re-adhered and re-typed and cut, which seriously damages the production efficiency of the Neodymium magnet. After years of exploration, the production slicer of Neodymium magnets has been improved several times. The development of multi-line cutting and slicing machine has been greatly improved, both in terms of production efficiency and processing technology. The size requires re-bonding to re-type the cut, and multi-line cutting avoids this problem.
What is the difference between a multi-line slicer and a normal slicer?
Two sample vertical stop bits (up and down) Five slice modes: single, continuous, step, half-knife, programming. The slicing speed is automatically adjusted according to the slice thickness, and the trimming function can be turned off. In the automatic state, the parameters of the trimming block are automatically adjusted. In the manual state, the parameters of the trimming block can be programmed. The slice thickness and the trim thickness can be independently selected and stored. The visual signal and the sound signal indicate the forward and backward limit and the remaining injection distance when the sample is injected. The slicer is a machine for cutting thin and uniform tissue pieces. The tissue is supported by hard cast iron or its pig iron, and the slice thicknesses is automatically cut once per cut. The dimensional accuracy of the Neodymium magnet is controlled forward (toward the direction of the knife) by a desired distance, and the gradient of the thickness is typically 1 micron. When the paraffin-embedded tissue is cut, a plurality of sliced slices are formed by adhering to the wax side of the previous slice.
Manufacturing Process: The manufacture of Neodymium uses powder metallurgy
Process: Ingredients → smelting ingots → milling → pressing → sintering and tempering → magnetic testing → grinding processing → pin cutting processing → plating → finished products.
The process of cutting the finished product into a finished electroplating product: Picking--sticking--cutting--black sheet inspection--cooking--receiving--polishing--plating--white sheet inspection--finished product.
How long does it take to produce Neodymium?
A normal wafer magnet takes 7-10 days, and it takes 12-15 days for the wafer to be punched. The square is formed by cutting 3 knives, which is also 10-12 days.
