Contact Us
Xiamen Everbeen Magnet Electron Co., Ltd.
Add: Unit H, 4F Beirongxin Mansion, No. 8 Xinfeng 2nd road, Torch Hi-Tech Zone, Xiamen, China.
Tel: 0086-592-5781916
Fax: 0086-592-5123653
Home > Industry Trends

Industry Trends

What are the methods and techniques for storing neodymium magnets?
Time:04/30/2021
1. Neodymium iron boron magnets are suitable for storage in a ventilated and dry room. Acidic, alkaline, organic solvents, water, and high temperature and humid environments can easily cause corrosion of the magnet, and the coating will fall off and the magnet will be powdered and demagnetized. Special-shaped magnets should be paid more attention to products that are not electroplated. They can be properly oiled to prevent rust during storage. This is also the main reason why anti-corrosion treatment on the surface of neodymium iron boron magnets is recommended.
 
2. After heating, the magnetic properties of NdFeB magnets will be greatly reduced. Please refer to the catalog or related temperature characteristic pointers, and pay attention to the temperature not too high when the magnet is assembled or used.
 
3. When using or storing the magnet, please avoid the environment containing corrosive gas, high conductivity (such as water containing electrolyte, etc.), acidic environment, organic solvent, etc. Otherwise it will cause corrosion of the magnet and weaken the magnetic properties and mechanical strength. For heat resistance and other conditions, please refer to the product catalog or other data. For related issues, please consult with Jia Tu Company.
 
4. The magnet is hard and brittle, so when it is used in occasions with vibration, impact, etc., it may break or fall off. If it is used for this kind of purpose, please pay attention to the design, even if the magnet is broken, it will not fall off.
 
 5. Da is a high-speed rotating body, so magnets and other objects may be broken. When designing special-shaped magnets, please take necessary precautions, in case the magnet is broken, the fragments will not fly out.
 
6. Neodymium iron boron is very magnetic, so you should avoid your hands or other parts of your body from being clamped by the magnet during operation. For larger magnets, you should pay more attention to personal safety and protection.
 
7. Do not bring magnets close to the magnets of electronic medical equipment or people who carry medical equipment such as pacemakers.
 
8. Do not swallow the magnet. In case of accidental swallowing, please go to the hospital for treatment immediately. Do not place the magnet where children can reach.
 
9. During the use of the magnet, ensure that the workplace is clean. Special-shaped magnets can prevent small impurities such as iron magnet chips from being adsorbed on the surface of the magnet and affecting the normal use of the product.