1.14years manufacture experience in rod ndfeb magnet
2.Have Rohs certification
3.Long guarantee period
rod ndfeb magnet
Sintered Neodym Magnete
Disc:Max:diameter 202mm*45mm thickness---Min:diameter 1.5mm*0.5mm thickness
Ring:Max:Od202mm*Id182mm*thickness 45mm---Min:Od 3mm*Id1mm*3mm thickness
Block:Max:L200mm*W200mm*T45mm---Min:L0.5mm*W0.5mm*T0.5mm
segment and other irregular shapes can be manufacture according to customer's sample or drawing.
Sintered Neodym Magnete mainly comprised of neodymium ,iron and boron,is the third generation of the rare-earth permanent magnets,Sintered Ndfeb is the strongest permanent magnets in the world up to date,It has excellent properties of high remanence,coercivity,and Max.energy product.
Sintered Neodym Magnete grade
N35, N38, N40, N42, N45, N48, N50, N52(Max. Operational temperature: 80c)
N35M, N38M, N40M, N42M, N45M, N48M(Max. Operational temperature: 100c)
N35H, N38H, N40H, N42H, N45H, N48H, (Max. Operational temperature: 120C)
N33SH, N35SH, N38SH, N40SH, N42SH(Max. Operational temperature: 150c)
N28UH, N30UH, N33UH, N35UH, N38UH(Max. Operational temperature: Up to 180c)
N28EH, N30EH, N33EH, N35EH(Max. Operational temperature: Up to 200c)
N30AH, N33AH, N35AH(Max. Operational temperature: Up to 230c)
Sintered Neodym Magnet Outsanding product:
1)high performance:N52,N48M,48SH,42UH,38EH,33AH
2)high working temperature:the AH series with 40 k Oe super-high coervice force can replace SmCo magnets successfully.
3)high consistency:the cpk of Br and Hcj are much higher than 1.67 the consisitency of surface magnetic field and magnetic flux can be controlled with +/-1%
4)High Anti-corrosion:the sale spray test and humid heat test of the high anti-corrosion coating could be more than 1000 hours
5) low weight loss
PCT:130c ,humidity 100%,vapor pressure 2.7 bar.20 days,average low weight loss less than 2 mg/cm2
Sintered Neodym Magnete applications:
loudspeakers,motor assemblies,windmill,Home appliance,acousics,communication equipment,toy,car,servomotor,step motor,DC motor and linear motor,mircrophones
Pros: Very strong hold when contacting another magnet or plain iron, very difficult to pull away (easy to slide however).
Pretty strong hold between two of these even with a couple of mm in between.
Cons: Would like thicker (and more powerful) versions. Sure u can stack these together but sometimes it's not the same thing.
Other Thoughts: Good for attaching thick stacks of paper to refrigerators etc or pinching together papers or textiles.
Bottomline: This is the one if you need strong cost-effective magnets
you are welcome to enquiry on our Sintered Neodym Magnete
Our end goal
To make friends through business and share success together is our end goal.
You are welcome to visit our factory.
Samples are available for your test.
